Knoppix.ru

Dec 15 09:20:07 localhost kernel: SCSI subsystem initialized
Dec 15 09:20:07 localhost kernel: libata version 2.21 loaded.
Dec 15 09:20:07 localhost kernel: ata_piix 0000:00:1f.1: version 2.11
Dec 15 09:20:07 localhost kernel: PCI: Found IRQ 11 for device 0000:00:1f.1
Dec 15 09:20:07 localhost kernel: PCI: Sharing IRQ 11 with 0000:00:1c.2
Dec 15 09:20:07 localhost kernel: PCI: Sharing IRQ 11 with 0000:00:1d.2
Dec 15 09:20:07 localhost kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64
Dec 15 09:20:07 localhost kernel: scsi0 : ata_piix
Dec 15 09:20:07 localhost kernel: scsi1 : ata_piix
Dec 15 09:20:07 localhost kernel: ata1: PATA max UDMA/100 cmd 0x00017000 ctl 0x00016802 bmdma 0x00015800 irq 11
Dec 15 09:20:07 localhost kernel: ata2: PATA max UDMA/100 cmd 0x00016400 ctl 0x00016002 bmdma 0x00015808 irq 11
Dec 15 09:20:07 localhost kernel: irq 11: nobody cared (try booting with the "irqpoll" option)
Dec 15 09:20:08 localhost kernel:  [] show_trace_log_lvl+0x1a/0x30
Dec 15 09:20:08 localhost kernel:  [] show_trace+0x12/0x20
Dec 15 09:20:08 localhost kernel:  [] dump_stack+0x16/0x20
Dec 15 09:20:08 localhost kernel:  [] __report_bad_irq+0x27/0x90
Dec 15 09:20:08 localhost kernel:  [] note_interrupt+0x23d/0x270
Dec 15 09:20:08 localhost kernel:  [] handle_level_irq+0x8c/0xf0
Dec 15 09:20:08 localhost kernel:  [] do_IRQ+0x41/0x80
Dec 15 09:20:08 localhost kernel:  [] common_interrupt+0x23/0x28
Dec 15 09:20:08 localhost kernel:  [] do_softirq+0x58/0x60
Dec 15 09:20:08 localhost kernel:  [] irq_exit+0x79/0x90
Dec 15 09:20:08 localhost kernel:  [] do_IRQ+0x46/0x80
Dec 15 09:20:08 localhost kernel:  [] common_interrupt+0x23/0x28
Dec 15 09:20:08 localhost kernel:  [] ata_exec_internal_sg+0x21f/0x3b0 [libata]
Dec 15 09:20:08 localhost kernel:  [] ata_exec_internal+0x7c/0xc0 [libata]
Dec 15 09:20:08 localhost kernel:  [] ata_dev_read_id+0x108/0x400 [libata]
Dec 15 09:20:08 localhost kernel:  [] ata_do_eh+0xdcb/0x1ad0 [libata]
Dec 15 09:20:08 localhost kernel:  [] ata_bmdma_drive_eh+0x8b/0x140 [libata]
Dec 15 09:20:08 localhost kernel:  [] piix_pata_error_handler+0x24/0x30 [ata_piix]
Dec 15 09:20:08 localhost kernel:  [] ata_scsi_error+0x1bb/0x5d0 [libata]
Dec 15 09:20:08 localhost kernel:  [] scsi_error_handler+0xa6/0x4f0 [scsi_mod]
Dec 15 09:20:08 localhost kernel:  [] kthread+0x42/0x70
Dec 15 09:20:08 localhost kernel:  [] kernel_thread_helper+0x7/0x1c
Dec 15 09:20:08 localhost kernel:  =======================
Dec 15 09:20:08 localhost kernel: handlers:
Dec 15 09:20:08 localhost kernel: [] (ata_interrupt+0x0/0x210 [libata])
Dec 15 09:20:08 localhost kernel: Disabling IRQ #11
Dec 15 09:20:08 localhost kernel: Clocksource tsc unstable (delta = 332591139 ns)
Dec 15 09:20:08 localhost kernel: Time: pit clocksource has been installed.
Dec 15 09:20:08 localhost kernel: ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL03, max UDMA/33
Dec 15 09:20:08 localhost kernel: input: ImPS/2 Generic Wheel Mouse as /class/input/input1
Dec 15 09:20:08 localhost kernel: ata1.01: qc timeout (cmd 0x27)
Dec 15 09:20:08 localhost kernel: ata1.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (156301488)
Dec 15 09:20:08 localhost kernel: ata1.01: ATA-6: ST380011A, 8.01, max UDMA/100
Dec 15 09:20:08 localhost kernel: ata1.01: 156301488 sectors, multi 16: LBA48
Dec 15 09:20:08 localhost kernel: ata1.00: failed to set xfermode (err_mask=0x40)
Dec 15 09:20:08 localhost kernel: ata1: failed to recover some devices, retrying in 5 secs
Dec 15 09:20:08 localhost crond[2967]: (CRON) STARTUP (V5.0)
Dec 15 09:20:08 localhost service_harddrake[2733]: ### Program is starting ###
Dec 15 09:20:08 localhost kernel: ata1.01: qc timeout (cmd 0x27)
Dec 15 09:20:08 localhost kernel: ata1.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (156301488)
Dec 15 09:20:08 localhost kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
Dec 15 09:20:08 localhost kernel: ata1.00: revalidation failed (errno=-5)
Dec 15 09:20:08 localhost kernel: ata1.00: limiting speed to UDMA/33:PIO3
Dec 15 09:20:08 localhost kernel: ata1: failed to recover some devices, retrying in 5 secs
Dec 15 09:20:08 localhost kernel: ata1.01: qc timeout (cmd 0x27)
Dec 15 09:20:08 localhost kernel: ata1.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (156301488)
Dec 15 09:20:08 localhost kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
Dec 15 09:20:08 localhost kernel: ata1.00: revalidation failed (errno=-5)
Dec 15 09:20:08 localhost kernel: ata1.00: disabled
Dec 15 09:20:08 localhost kernel: ata1: failed to recover some devices, retrying in 5 secs
Dec 15 09:20:08 localhost kernel: ata1.01: failed to set xfermode (err_mask=0x40)
Dec 15 09:20:08 localhost kernel: ata1: failed to recover some devices, retrying in 5 secs
Dec 15 09:20:08 localhost kernel: ata1.01: qc timeout (cmd 0x27)
Dec 15 09:20:08 localhost kernel: ata1.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (156301488)
Dec 15 09:20:08 localhost kernel: ata1.01: failed to set xfermode (err_mask=0x40)
Dec 15 09:20:08 localhost kernel: ata1.01: limiting speed to UDMA/100:PIO3
Dec 15 09:20:08 localhost kernel: ata1: failed to recover some devices, retrying in 5 secs
Dec 15 09:20:08 localhost kernel: ata1.01: qc timeout (cmd 0x27)
Dec 15 09:20:08 localhost kernel: ata1.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (156301488)
Dec 15 09:20:08 localhost kernel: ata1.01: failed to set xfermode (err_mask=0x40)
Dec 15 09:20:08 localhost kernel: ata1.01: disabled
Dec 15 09:20:08 localhost kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Dec 15 09:20:08 localhost kernel: PCI: Found IRQ 10 for device 0000:00:1f.2
Dec 15 09:20:08 localhost kernel: PCI: Sharing IRQ 10 with 0000:00:1c.3
Dec 15 09:20:08 localhost kernel: PCI: Sharing IRQ 10 with 0000:00:1d.1
Dec 15 09:20:08 localhost kernel: IRQ routing conflict for 0000:00:1f.3, have irq 5, want irq 10
Dec 15 09:20:08 localhost kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Dec 15 09:20:08 localhost kernel: scsi2 : ata_piix
Dec 15 09:20:08 localhost kernel: scsi3 : ata_piix
Dec 15 09:20:08 localhost kernel: ata3: SATA max UDMA/133 cmd 0x00018800 ctl 0x00018402 bmdma 0x00017400 irq 10
Dec 15 09:20:08 localhost kernel: ata4: SATA max UDMA/133 cmd 0x00018000 ctl 0x00017802 bmdma 0x00017408 irq 10
Dec 15 09:20:08 localhost kernel: ata3.00: ATA-7: WDC WD3200JS-00PDB0, 21.00M21, max UDMA/133
Dec 15 09:20:08 localhost kernel: ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/1)
Dec 15 09:20:08 localhost kernel: ata3.00: configured for UDMA/133
Dec 15 09:20:08 localhost kernel: ata4.00: ATA-7: WDC WD3200JS-00PDB0, 21.00M21, max UDMA/133
Dec 15 09:20:08 localhost kernel: ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/1)
Dec 15 09:20:08 localhost kernel: ata4.01: ATA-6: ST380817AS, 3.42, max UDMA/133
Dec 15 09:20:08 localhost kernel: ata4.01: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
Dec 15 09:20:08 localhost kernel: ata4.00: configured for UDMA/133
Dec 15 09:20:08 localhost kernel: ata4.01: configured for UDMA/133
Dec 15 09:20:08 localhost kernel: scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200JS-00P 21.0 PQ: 0 ANSI: 5
Dec 15 09:20:08 localhost kernel: scsi 3:0:0:0: Direct-Access     ATA      WDC WD3200JS-00P 21.0 PQ: 0 ANSI: 5
Dec 15 09:20:08 localhost kernel: scsi 3:0:1:0: Direct-Access     ATA      ST380817AS       3.42 PQ: 0 ANSI: 5