Самое смешное что под Live-CD Knoppix - все пишется замечательно, да и прога там руссифицирована K3B
А под Slaxware 11 - она мне устроила брак - вот лог:
Цитата:
System
-----------------------
K3b Version: 0.12.17
KDE Version: 3.5.4
QT Version: 3.3.6
Kernel: 2.4.33.3
Devices
-----------------------
TSSTcorp CDW/DVD TS-L462D AS00 (/dev/hdb, ) at /mnt/cdrom [CD-R; CD-RW; CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]
Used versions
-----------------------
cdrecord: 2.1
cdrecord
-----------------------
scsidev: 'ATAPI:/dev/hdb'
devname: 'ATAPI:/dev/hdb'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J?rg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identifikation : 'CDW/DVD TS-L462D'
Revision : 'AS00'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Profile: 0x0010
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1362944 = 1331 KB
FIFO size : 4194304 = 4096 KB
pregap1: -1
Track 01: audio 472 MB (46:46.70) no preemp swab copy
Total size: 472 MB (46:46.70) = 210503 sectors
Lout start: 472 MB (46:48/53) = 210503 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -11535 (97:28/15)
ATIP start of lead out: 359847 (79:59/72)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 7
Manufacturer: GIGASTORAGE CORPORATION
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 149344
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 472 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 01 44 00 00 1B 00
status: 0x0 (GOOD STATUS)
cmd finished after 10.071s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 762048 bytes
Writing time: 24.049s
Average write speed 174.0x.
Fixating...
Fixating time: 0.002s
/usr/bin/cdrecord: fifo had 76 puts and 13 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 4 times full, min fill was 89%.
BURN-Free was never needed.
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=ATAPI:/dev/hdb speed=4 -dao driveropts=burnfree -eject -useinfo -audio -shorttrack /tmp/kde-root/k3b_audio_0_01.inf
Кто подскажет чего - буду признателен...
Привод 100% исправен - ибо под Кноппиксом пишет...
Вход
FAQ
Пользователи
Добавлено: Чт мар 29, 2007 12:57 am
